部件

All parts of the aircraft are closely scrutinised for signs of wear or damage.

飞机所有部件都经过严密检查以确定是否有磨损或迹象。

A key is the part of a pianoforte that you touch to make music.

琴键是钢琴上用手指敲击部件,它能使钢琴发出乐音。

A mechanic overhauled the car’s motor with some new parts.

一个修理工对那辆汽车发动机进行了彻底检修,换了一些新部件。

250 parts in his cars were made to tolerances of one thousandth of an inch.

他汽车里头250个部件公差被限至1‰英寸。

Our company is ahead of other makers of spare parts for the airplane.

我们公司制造飞机零部件比别家业绩好。

He bought the parts separately and assembled his own computer.

他一一买来部件,装自己电脑。

All the machine parts on a blueprint must answer each other.

设计图上所有机器部件都应互相配合。

The safety part in hoistway and pit is finished, safety loop is connective.

井道安全部件、底坑安全部件安装到位，安全路导通。

Every part is individually checked before assembly.

在装配前,部件要逐个检查。

The moving parts of this machine should be oiled regularly.

这部机器运转部件应该上油。

Lift entire topwork clear of body.

将整个顶部部件拿起，然后清洗阀体。

The unit is composed of hydraulic and double conic placing,hydraulic spading and drawing ,straightening,shearing,end stopping,coiling,feeding,dropping cart,ect.

本机有液压,双锥放料,液压铲头引头,送料,校直,剪切,阻尼,收卷,上料,下料小车等主要部件.

The components consisted of roll, bearings, clutch and gearcase is typical parts in a paper machine.

子、轴承、联轴器、齿轮箱是抄纸机典型部件。

As the core component,rotor system may run abnormally,have the failures of unbalance,bearing damage and incorret alignment.

作为它核心部件，转子系统运行过程中可能出现不平衡、不对中、轴承损等故障。

Be used widely as heater parts in various machine devices ,such as plastic press,duplicato, printer,facsimile printer,etc.

普遍应用于各种机器设备上作加热部件，如过塑机、复印机、打印机、传真机等。

Non-uniform rational B-splines (NURBS) was used to fit component characteristics of aerothermodynamic model for approaching turbine engine.

摘要为了使气动热力模型更好逼近涡轮发动机，应用熟非均匀B样条来拟合部件特性。

The paper describes the distinguishing features of developing small-scale for group stater panel in engine control room.

论述船用合启动盘小型化发展特点，分析了启动盘部件改造和国外产品技术进展。

These units are specially suited for the removal of strong burrs and intensive radiusing of small to mid-size parts.

离心装置特别适合去除尖刺，也适合中小部件去刺。

Let's cement the parts together.

咱们来把这些部件粘接在一起吧。

Parts separating two pressure chambers, a corrosion allowance shall be provided on (strikethrough: either) each side of the parts.

两个压力室分隔部件，应对部件每侧提供一个腐蚀余度。